喏若

哇哇哇单位

Comments

Post a Comment

Popular posts from this blog

Industrial Functional Epoxy Floor Paint At Wholesale Factory Price

YMS Paint is the best wholesale floor paint and industrial paint suppliers in China, and our industrial floor paint is a high solid two-component paint which is composed of modified epoxy resin, conductive metal powder, elastic polyamide curing agent, etc. In addition, this paint also needs to add wear-resisting fillers before use. Meanwhile, the paint film has excellent oil resistance, corrosion resistance, wear resistance and long-lasting anti-static effect. Industrial Floor Paint Typical Uses: YMS industrial floor paint is designed for walls, floors and storage tanks of the anti-static factories such as the electronic, microelectronic, communication and computer. Besides, the types of foregoing factories also include precision instrument, textile, printing, powder, etc. PRODUCT SELLING POINT ● YMS Paint Manufacturers products are mainly prepared by epoxy resin, curing agent, dispersant and aggregates depend on requirements. ● Main advantages of this industrial floor paint are grea...
Read more

Leakage point for pump mechanical seal

The pump mechanical seal means that the installation of the dynamic sealing effect of the installation runs in the pump device, and the leak point of the device needs to be understood during use, so as not to use improper use, the equipment is damaged, and the leakage situation is increased. (1) the seal of the shaft sleeve and the shaft; (2) Sealing between the articles and the bushing; Pump mechanical seal (3) Moving, static ring seal; (4) Sealing of the static ring and the static ring; (5) Sealed end cap and the seal between the pump body. In general, the leakage between the pump is more likely to discover and solve the leakage between the sealing end cap and the pump body, but it is necessary to observe, especially when the working medium is a liquefied gas or high pressure, toxic and harmful gas. It is relatively difficult. It is difficult to disclaimer and judging the remaining leaks, and must be observed, analyzed and developed by long-term management and maintenance practice.
Read more

What are the types of elbow pipe fitting

What is elbow pipe fitting The elbow is used to change the direction of the pipe. The bending angles of commonly used elbow pipe fitting are 90°, 45° and 180°. The 180° elbow is also called U-shaped elbow. There are also special angle elbow pipe fitting , but there are very few elbow pipe fitting. The types of elbow pipe fitting are as follows: 1. Malleable steel elbow Malleable iron elbow, also known as malleable cast iron elbow, is the most common threaded elbow. The specifications of malleable steel elbow pipe fitting are relatively small, and the commonly used specifications range from 1/2 to 4 inches. According to their different surface treatments, they are divided into galvanized and non-galvanized. This kind of malleable steel pipe fittings are mainly used for heating, water pipes and gas pipes. In the process, except for the low-pressure pipeline that needs to be frequently disassembled, other material pipelines are rarely used. 2. Pressed elbow Pressed elbow pipe fitting, als...
Read more